hans

Home|Tag:hans

How Can You Find the HVAC System That’s Right for You?

2017-04-07T13:10:28+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

Get the facts from an expert. There are many brands, types, efficiencies, etc. of heating and air conditioning systems to choose from nowadays. Hans Luquire, with over 30 years of industry experience, and his team [...]

What Are the Benefits of Purchasing a New HVAC System?

2017-04-07T13:09:58+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , , , |

Efficiency, cost, and environmental savings. At Hans Heating and Air, we realize that purchasing a new HVAC system is no small matter, and it’s not cheap. That said, if your existing system is old, in [...]

How Long Will Your HVAC System Last?

2017-04-07T13:09:32+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , |

Proper maintenance is key. Routine maintenance and service plays a key role in the lifecycle of your heating and/or air conditioning system. If all recommended maintenance and service actions are taken, your air conditioner can [...]

What is HSPF?

2017-04-07T13:07:53+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , |

Heating Seasonal Performance Factor. HSPF is the abbreviation for the Heating Seasonal Performance Factor, which is a rating of the efficiency level of the heating operation of a heat pump. The higher the HSPF, the [...]

What Is R-22?

2017-04-06T17:13:54+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , |

R-22 is the common name for hydro-chlorofluorocarbon (HCFC). R-22 has been used as a refrigerant by HVAC manufacturers for over 40 years; however, studies conducted over the past decade have shown that HCFC contains chlorine, [...]

What Is AFUE?

2017-04-06T17:05:51+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

Annual Fuel Utilization Efficiency. AFUE is the abbreviation for the Annual Fuel Utilization Efficiency ratio. AFUE is used to rate furnace efficiencies by dividing the ratio of heat output by heat input. This measurement describes [...]

What Goes into Installing a New System?

2017-04-06T16:52:59+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

It’s all about the ductwork. Installing a new system in a home that hasn’t previously had central heating and air will require the installation of ductwork, insulation, refrigerant piping, electrical service, wiring, thermostat(s), condensate piping, [...]

What You Should Know about Replacing Your Old HVAC System

2017-04-06T16:55:18+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

Start with a detailed inspection. In order to have the most efficient HVAC system for you and your household, a detailed inspection should first be performed by a certified HVAC professional. Our highly skilled, trained, [...]

Where Can You Locate Your Air Handler or Furnace System?

2017-04-06T16:30:10+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

You may have options based on your home’s design. The system can actually be located in several different places: A system with up-flow application might be located in the basement, while a system with a [...]

What Is a Heat Pump?

2017-04-06T16:23:39+00:00 Categories: Hans Heating and Air|Tags: , , , , , , , , , , , , , , |

Simply put: Air movement from Point A to Point B. A heat pump is a device used for either the heating or cooling of a space by transferring hot and cold between two reservoirs. A [...]